Market Research Report

A quick peek into the report

1.1   Industry Outlook
1.1.1   Trends: Industry Dynamics Defining the Future Trends of Metal 3D Printing Market
1.1.1.1   Increasing Demand from Aerospace and Healthcare Sectors
1.1.2   Supply Chain Analysis
1.1.3   Industry Attractiveness
1.1.3.1   Threat of New Entrants (Moderate)
1.1.3.2   Bargaining Power of Buyers (Moderate)
1.1.3.3   Bargaining Power of Suppliers (Moderate)
1.1.3.4   Threat of Substitutes (Moderate)
1.1.3.5   Intensity of Competitive Rivalry (Moderate)
1.1.4   Supply and Demand Analysis
1.1.5   Profit Margin Analysis
1.1.5.1   Reduction in the Initial Investments Required for Setting Up the Technology
1.1.5.2   Business Expansion Through Installation of New Production Facilities
1.1.5.3   Increasing Partnerships and Collaborations Among the Market Players, Research Centers, and Educational Institutions
1.1.5.4   Increasing Production to Higher Volumes
1.1.5.5   Research and Development Initiatives
1.1.6   Ecosystem/Ongoing Programs
1.1.6.1   Consortiums and Associations
1.1.6.2   Regulatory Bodies
1.1.6.3   Government Programs
1.1.6.4   Programs by Research Institutions and Universities
1.2   Business Dynamics
1.2.1   Business Drivers
1.2.1.1   Cost-Effectiveness, Greater Design Flexibility and Lower Wastage
1.2.1.1.1   Cost-Effectiveness
1.2.1.1.2   Greater Design Flexibility
1.2.1.1.3   Low Wastage
1.2.1.2   Reduced Prices of Metal 3D Printers Coupled with Advanced Raw Materials
1.2.1.2.1   Reduced Price of Metal 3D Printers
1.2.1.2.2   Advanced Raw Materials
1.2.1.3   Increasing Investments in Research and Development (R&D)
1.2.2   Business Restraints
1.2.2.1   High Costs of Metal Powders and Industry Grade 3D Printers
1.2.2.1.1   High Cost of Metal Powders
1.2.2.1.2   High Cost of Industry Grade Metal 3D Printers
1.2.2.2   Inferior Technical Properties as Compared to Conventionally Manufactured Products
1.2.2.2.1   Lower Strength
1.2.2.2.2   Residual Stress and Cracking
1.2.2.2.3   Heat Build-Up and Oxidation
1.2.2.2.4   Surface Finish
1.2.2.2.5   Porosity
1.2.2.2.6   Accuracy
1.2.3   Business Challenges
1.2.3.1   Technological Challenges Faced in Metal 3D Printing
1.2.3.1.1   Slow Production Speeds
1.2.3.1.2   Materials Development and Inconsistencies in Material Properties
1.2.3.1.3   Manual Post-Processing
1.2.3.2   Software Challenges in Metal 3D Printing
1.2.3.2.1   Limited Capabilities in Data Preparation and Design
1.2.3.3   Quality Assurance Challenges in Metal 3D Printing
1.2.3.3.1   Part-to-Part Variation
1.2.3.3.2   Lack of Industry-Wide Standards
1.2.3.4   Workforce Challenges in Metal 3D Printing
1.2.3.4.1   Lack of Understanding and Expertise in Additive Manufacturing
1.2.3.5   Financial Challenges in Metal 3D Printing
1.2.3.5.1   Making the Initial Investment
1.2.3.6   Workflow and Integration Challenges in Metal 3D Printing
1.2.3.6.1   Disjointed AM Ecosystem
1.2.3.6.2   Lack of Digital Infrastructure
1.2.3.7   Impact of COVID-19
1.2.4   Business Strategies
1.2.4.1   Product Developments
1.2.4.2   Market Developments
1.2.5   Corporate Strategies
1.2.5.1   Mergers and Acquisitions
1.2.5.2   Partnerships, Collaborations, and Joint Ventures
1.2.6   Business Opportunities
1.2.6.1   Growing Adoption of Metals Used for Specific Applications in Aerospace and Defense Sector
1.2.6.2   Producing High Quality Metal Powder with Enhanced Quality
1.2.6.3   Increased Demand from Healthcare Sector Due to Impact of COVID-19

2.1   Global Metal 3D Printing Market (by Application), Analysis and Forecast (2018-2025)
2.1.1   Market Overview
2.1.1.1   Aerospace and Defense
2.1.1.1.1   Improved Development Cycles
2.1.1.1.2   Designing of Complex Parts
2.1.1.1.3   Design Consolidation
2.1.1.1.4   Manufacturing of Spares
2.1.1.1.5   Weight Reduction
2.1.1.1.6   Efficiency of the Materials
2.1.1.1.7   Assurance of in-Process Quality
2.1.1.2   Medical and Healthcare
2.1.1.3   Automotive
2.1.1.4   Other (Construction, Tool and Die, General Engineering)

3.1   Global Metal 3D Printing Market (by Type), Analysis and Forecast (2019-2025)
3.1.1   Market Overview
3.2   Global Metal 3D Printing Market (by 3D Printable Metals and Alloys)
3.2.1 Titanium and Its Alloys
3.2.1.1 Complexity of Parts
3.2.1.2   Strength-Weight Ratio
3.2.1.2.1   Aerospace
3.2.1.2.2   Automotive
3.2.1.3   High-Temperature Strengths
3.2.1.4   Biocompatibility
3.2.1.5   Reduced Wastage
3.2.1.6   Reduced Printing Time
3.2.1.2   Aluminum and Its Alloys
3.2.1.3   Steels
3.2.1.4   Nickel and Its Alloys
3.2.1.5   Other Alloys
3.3   Global Metal 3D Printing Market (by Type of Raw Material Used in 3D Printing)
3.3.1   Powder-Based Raw Material
3.3.2   Resin-Based Raw Material
3.3.3   Lamina-Based Raw Material
3.3.4   Filament/Wire-Based Raw Material

4.1   Global Metal 3D Printing Market (by Technology)
4.1.1   Market Overview
4.1.2   Global Powder-Bed Fusion Metal 3D Printing Market
4.1.2.1   Global Selective Laser Sintering (SLS) Market
4.1.2.2   Global Selective Laser Melting (SLM) Market
4.1.2.3   Global Direct Metal Laser Sintering (DMLS) Market
4.1.2.4   Global Direct Metal Laser Melting (DMLM) Market
4.1.2.5   Global Direct Metal Printing (DMP) Market
4.1.2.6   Global Laser CUSING Market
4.1.2.7   Global Laser Metal Fusion (LMF) Market
4.1.3   Global Material/Binder Jetting Metal 3D Printing Market
4.1.3.1   Global Magnet-o-Jet Metal 3D Printing Market
4.1.3.2   Global Nano Particle Jetting Metal 3D Printing Market
4.1.3.3   Global Single Pass Jetting Market
4.1.3.4   Global Metal Jet Market
4.1.4   Global Direct Energy Deposition (DED) Metal 3D Printing Market
4.1.4.1   Global Direct Metal Tooling (DMT) Metal 3D Printing Market
4.1.4.2   Global Electron Beam Additive Manufacturing (EBAM) Metal 3D Printing Market
4.1.4.3   Global Electron Beam Melting (EBM) Metal 3D Printing Market
4.1.4.4   Global Laser Engineered Net Shaping (LENS) Metal 3D Printing Market
4.1.4.5   Global Laser Metal Deposition (LMD) Metal 3D Printing Market
4.1.5   Global Extrusion Metal 3D Printing Market
4.1.5.1   Global Atomic Diffusion Additive Manufacturing (ADAM) Metal 3D Printing Market
4.1.5.2   Global Composite Extrusion Modelling (CEM) Metal 3D Printing Market
4.1.5.3   Global Fused Deposition Modelling (FDM) Metal 3D Printing Market
4.1.5.4   Global Fused Filament Fabrication (FFF) Metal 3D printing market
4.1.5.5   Global Bound Metal Deposition (BMD) Metal 3D Printing Market
4.1.5.6   Global Metal Injection Molding (MIM) Metal 3D Printing Market
4.1.5.7   Global Selective Powder Deposition (SPD) Metal 3D Printing Market
4.1.6   Others (Resin-Based and Sheet Lamination-Based Metal 3D Printing)
4.1.7   Global Resin-Based Metal 3D Printing Market
4.1.7.1   Global Digital Light Processing (DLP) Metal 3D Printing Market
4.1.7.2   Global FluidFM Micro Metal 3D Printing Market
4.1.8   Global Sheet Lamination Metal 3D Printing Market
4.1.8.1   Global Ultrasonic Additive Manufacturing (UAM) Metal 3D Printing Market
4.2   Product Benchmarking: Growth Rate – Market Share Matrix
4.2.1   Opportunity Matrix (by Region)
4.2.2   Opportunity Matrix (by Product Type)
4.3   Patent Analysis
4.3.1   Patent Analysis (by Status)
4.3.2   Patent Analysis (by Company)
4.3.3   Patent Analysis (by Type of Metals/Alloys Used in Metal 3D Printing)

5.1   Global Metal 3D Printing Market (by Region), Analysis and Forecast (2019-2025)
5.2   NORTH AMERICA
5.2.1   Markets
5.2.1.1   Key Manufacturers in North America
5.2.1.2   Competitive Benchmarking
5.2.1.3   Business Challenges
5.2.1.4   Business Drivers
5.2.1.5   Applications
5.2.1.5.1   North America Metal 3D Printing Market (by Application), Value Data
5.2.1.6   Products
5.2.1.6.1   North America Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.2.1.6.2   North America Metal 3D Printing Market (by Technology), $Million, 2019-2025
5.2.2   NORTH AMERICA (BY COUNTRY)
5.2.2.1   U.S.
5.2.2.2   Markets
5.2.2.2.1   Buyer Attributes
5.2.2.2.2   Key Manufacturers and Suppliers in the U.S.
5.2.2.2.3   Business Challenges
5.2.2.2.4   Business Drivers
5.2.2.2.5   Applications
5.2.2.2.5.1   U.S. Metal 3D Printing Market (by Application), Value Data
5.2.2.2.6   Products
5.2.2.2.6.1   U.S. Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.2.2.3   CANADA
5.2.2.4   Markets
5.2.2.4.1   Buyer Attributes
5.2.2.4.2   Key Manufacturers and Suppliers in Canada
5.2.2.4.3   Business Challenges
5.2.2.4.4   Business Drivers
5.2.2.4.5   Applications
5.2.2.4.5.1   Canada Metal 3D Printing Market (by Application), Value Data
5.2.2.4.6   Products
5.2.2.4.6.1   Canada Metal 3d Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.2.2.5   MEXICO
5.2.2.5.1   Markets
5.2.2.5.1.1   Buyer Attributes
5.2.2.5.1.2   Key Manufacturers and Suppliers in Mexico
5.2.2.5.1.3   Business Challenges
5.2.2.5.1.4   Business Drivers
5.2.2.5.2   Applications
5.2.2.5.2.1   Mexico Metal 3D Printing Market (by Application), $Million, 2019-2025
5.2.2.5.3   Products
5.2.2.5.3.1   Mexico Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3   ASIA-PACIFIC JAPAN (APJ)
5.3.1   Markets
5.3.1.1   Key Manufacturers and Suppliers in Asia-Pacific Japan (APJ)
5.3.1.2   Competitive Benchmarking
5.3.1.3   Business Challenges
5.3.1.4   Business Drivers
5.3.1.4.1   Applications
5.3.1.4.1.1   Asia-Pacific Japan (APJ) Metal 3D Printing Market (by Application), Value Data
5.3.1.4.2   Products
5.3.1.4.2.1   Asia-Pacific Japan (APJ) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.1.4.2.2   Asia-Pacific Japan (APJ) Metal 3D Printing Market (by Technology), $Million, 2019-2025
5.3.2   ASIA-PACIFIC JAPAN (APJ) (BY COUNTRY)
5.3.2.1   JAPAN
5.3.2.2   Markets
5.3.2.2.1   Buyer Attributes
5.3.2.2.2   Key Manufacturers and Suppliers in Japan
5.3.2.2.3   Business Challenges
5.3.2.2.4   Business Drivers
5.3.2.2.5   Applications
5.3.2.2.5.1   Japan Metal 3D Printing Market (by Application), Value Data
5.3.2.2.6   Products
5.3.2.2.6.1   Japan Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.3   INDIA
5.3.2.3.1   Markets
5.3.2.3.2   Buyer Attributes
5.3.2.3.2.1   Key Manufacturers and Suppliers in India
5.3.2.3.2.2   Business Challenges
5.3.2.3.2.3   Business Drivers
5.3.2.3.3   Applications
5.3.2.3.3.1   India Metal 3D Printing Market (by Application), Value Data
5.3.2.3.4   Products
5.3.2.3.4.1   India Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.4   SOUTH KOREA
5.3.2.4.1   Markets
5.3.2.4.1.1   Buyer Attributes
5.3.2.4.1.2   Key Manufacturers and Suppliers in South Korea
5.3.2.4.1.3   Business Challenges
5.3.2.4.1.4   Business Drivers
5.3.2.4.2   Applications
5.3.2.4.2.1   South Korea Metal 3D Printing Market (by Application), Value Data
5.3.2.4.3   Products
5.3.2.4.3.1   South Korea Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.5   AUSTRALIA & NEW ZEALAND
5.3.2.5.1   Markets
5.3.2.5.1.1   Buyer Attributes
5.3.2.5.1.2   Key Manufacturers and Suppliers in Australia & New Zealand
5.3.2.5.1.3   Business Challenges
5.3.2.5.1.4   Business Drivers
5.3.2.5.2   Applications
5.3.2.5.2.1   Australia & New Zealand Metal 3D Printing Market (by Application), Value Data
5.3.2.5.3   Products
5.3.2.5.3.1   Australia & New Zealand Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.6   SINGAPORE
5.3.2.6.1   Markets
5.3.2.6.1.1   Buyer Attributes
5.3.2.6.1.2   Key Manufacturers and Suppliers in Singapore
5.3.2.6.1.3   Business Challenges
5.3.2.6.1.4   Business Drivers
5.3.2.6.2   Applications
5.3.2.6.2.1   Singapore Metal 3D Printing Market (by Application), Value Data
5.3.2.6.3   Products
5.3.2.6.3.1   Singapore Metal 3D Printing Market ((by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.7   TAIWAN
5.3.2.7.1   Markets
5.3.2.7.1.1   Buyer Attributes
5.3.2.7.1.2   Key Manufacturers and Suppliers in Taiwan
5.3.2.7.1.3   Business Challenges
5.3.2.7.1.4   Business Drivers
5.3.2.7.2   Applications
5.3.2.7.2.1   Taiwan Metal 3D Printing Market (by Application), Value Data
5.3.2.7.3   Products
5.3.2.7.3.1   Taiwan Metal 3D Printing Market ((by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.8   Rest-of-APJ
5.3.2.8.1   Markets
5.3.2.8.1.1   Buyer Attributes
5.3.2.8.1.2   Key Manufacturers and Suppliers in Rest-of-APJ
5.3.2.8.1.3   Business Challenges
5.3.2.8.1.4   Business Drivers
5.3.2.8.2   Applications
5.3.2.8.2.1   Rest-of-APJ Metal 3D Printing Market (by Application), Value Data
5.3.2.8.3   Products
5.3.2.8.3.1   Rest of APJ Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.4   CHINA
5.4.1   Markets
5.4.1.1   Key Manufacturers and Suppliers in China
5.4.1.2   Competitive Benchmarking
5.4.1.3   Business Challenges
5.4.1.4   Business Drivers
5.4.1.5   Applications
5.4.1.5.1   China Metal 3D Printing Market (by Application), Value Data
5.4.1.6   Products
5.4.1.6.1   China Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.4.1.6.2   China Metal 3D Printing Market (by Technology), $Million, 2019-2025
5.5   EUROPE
5.5.1   Markets
5.5.1.1   Key Manufacturers and Suppliers in Europe
5.5.1.2   Competitive Benchmarking
5.5.1.3   Business Challenges
5.5.1.4   Business Drivers
5.5.1.5   Applications
5.5.1.5.1   Europe Metal 3D Printing Market (by Application), Value Data
5.5.1.6   Products
5.5.1.6.1   Europe Metal 3D Printing Market ((by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.1.6.2   Europe Metal 3D Printing Market (by Technology), $Million, 2019-2025
5.5.2   EUROPE (BY COUNTRY)
5.5.2.1   GERMANY
5.5.2.1.1   Markets
5.5.2.1.1.1   Buyer Attributes
5.5.2.1.1.2   Key Manufacturers and Suppliers in Germany
5.5.2.1.1.3   Business Challenges
5.5.2.1.1.4   Business Drivers
5.5.2.1.2   Applications
5.5.2.1.2.1   Germany Metal 3D Printing Market (by Application), Value Data
5.5.2.1.3   Products
5.5.2.1.3.1   Germany Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.2.2   FRANCE
5.5.2.2.1   Markets
5.5.2.2.1.1   Buyer Attributes
5.5.2.2.1.2   Key Manufacturers and Suppliers in France
5.5.2.2.1.3   Business Challenges
5.5.2.2.1.4   Business Drivers
5.5.2.2.2   Applications
5.5.2.2.2.1   France Metal 3D Printing Market (by Application), Value Data
5.5.2.2.3   Products
5.5.2.2.3.1   France Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.2.3   ITALY
5.5.2.3.1   Markets
5.5.2.3.1.1   Buyer Attributes
5.5.2.3.1.2   Key Manufacturers and Suppliers in Italy
5.5.2.3.1.3   Business Challenges
5.5.2.3.1.4   Business Drivers
5.5.2.3.2   Applications
5.5.2.3.2.1   Italy Metal 3D Printing Market (by Application), Value and Volume Data
5.5.2.3.3   Products
5.5.2.3.3.1   Italy Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.2.4   SPAIN
5.5.2.4.1   Markets
5.5.2.4.1.1   Buyer Attributes
5.5.2.4.1.2   Key Manufacturers and Suppliers in Spain
5.5.2.4.1.3   Business Challenges
5.5.2.4.1.4   Business Drivers
5.5.2.4.2   Applications
5.5.2.4.2.1   Spain Metal 3D Printing Market (by Application), Value Data
5.5.2.4.3   Products
5.5.2.4.3.1   Spain Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.2.5   NETHERLANDS
5.5.2.5.1   Markets
5.5.2.5.1.1   Buyer Attributes
5.5.2.5.1.2   Key Manufacturers and Suppliers in the Netherlands
5.5.2.5.1.3   Business Challenges
5.5.2.5.1.4   Business Drivers
5.5.2.5.2   Applications
5.5.2.5.2.1   Netherlands Metal 3D Printing Market (by Application), Value Data
5.5.2.5.3   Products
5.5.2.5.3.1   Netherlands Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.2.6   Rest-of-Europe (RoE)
5.5.2.6.1   Markets
5.5.2.6.1.1   Buyer Attributes
5.5.2.6.1.2   Key Manufacturers and Suppliers in the Rest-of-Europe (RoE)
5.5.2.6.1.3   Business Challenges
5.5.2.6.1.4   Business Drivers
5.5.2.6.2   Applications
5.5.2.6.2.1   Rest-of-Europe (RoE) Metal 3D Printing Market (by Application), Value Data
5.5.2.6.3   Products
5.5.2.6.3.1   Rest-of-Europe (RoE) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.6   U.K.
5.6.1.1   Key Manufacturers and Suppliers in the U.K.
5.6.1.2   Competitive Benchmarking
5.6.1.3   Business Challenges
5.6.1.4   Business Drivers
5.6.1.4.1   Applications
5.6.1.4.1.1   U.K. Metal 3D Printing Market (by Application), Value Data
5.6.1.4.2   Products
5.6.1.4.2.1   U.K. Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.6.1.4.2.2   U.K. Metal 3D Printing Market (by Technology), $Million, 2019-2025
5.7   REST-OF-THE-WORLD (ROW)
5.7.1   Markets
5.7.1.1   Key Manufacturers and Suppliers in the Rest-of-the-World (RoW)
5.7.1.2   Competitive Benchmarking
5.7.1.3   Business Challenges
5.7.1.4   Business Drivers
5.7.1.5   Applications
5.7.1.5.1   Rest-of-the-World (RoW) Metal 3D Printing Market (by Application), $Million, 2019-2025
5.7.1.5.2   Products
5.7.1.5.2.1   Rest-of-the-World (RoW) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.7.1.5.2.2   Rest-of-the-World (RoW) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.7.2   REST-OF-THE-WORLD (BY COUNTRY)
5.7.2.1   SOUTH AMERICA
5.7.2.1.1   Markets
5.7.2.1.1.1   Buyer Attributes
5.7.2.1.1.2   Key Manufacturers and Suppliers in South America
5.7.2.1.1.3   Business Challenges
5.7.2.1.1.4   Business Drivers
5.7.2.1.2   Applications
5.7.2.1.2.1   South America Metal 3D Printing Market (by Application), Value Data
5.7.2.1.3   Products
5.7.2.1.3.1   South America Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.7.2.2   MIDDLE EAST & AFRICA (MEA)
5.7.2.2.1   Markets
5.7.2.2.1.1   Buyer Attributes
5.7.2.2.1.2   Key Manufacturers and Suppliers in Middle East & Africa (MEA)
5.7.2.2.1.3   Business Challenges
5.7.2.2.1.4   Business Drivers
5.7.2.2.2   Applications
5.7.2.2.2.1   Middle East & Africa (MEA) Metal 3D Printing Market (by Application), Value Data
5.7.2.2.3   Products
5.7.2.2.3.1   Middle East & Africa (MEA) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025

6.1   Competitive Benchmarking
Company Profiles
6.2   Oerlikon
6.2.1   Company Overview
6.2.1.1   Product Portfolio
6.2.1.2   Production Sites
6.2.2 Business Strategies
6.2.2.1 Product Developments
6.2.2.2 Market Developments
6.2.3 Corporate Strategies
6.2.3.1 Mergers and Acquisitions
6.2.3.2 Partnerships, Collaborations, and Joint Ventures
6.2.4 R&D and Patent Analysis
6.2.5 Competitive Position
6.2.5.1   Strengths of Oerlikon in the Global Metal 3D Printing Market
6.2.5.2   Weaknesses of Oerlikon in the Global Metal 3D Printing Market
6.3   Aubert & Duval
6.3.1   Company Overview
6.3.1.1   Product Portfolio
6.3.1.2   Production Sites
6.3.2   Corporate Strategies
6.3.2.1   Partnerships, Collaborations, and Joint Ventures
6.3.3   Research and Development (R&D) and Patent Analysis
6.3.4   Competitive Position
6.3.4.1   Strengths of Aubert & Duval in the Global Metal 3D Printing Market
6.3.4.2   Weaknesses of Aubert & Duval in the Global Metal 3D Printing Market
6.4   Carpenter Technology Corporation
6.4.1   Company Overview
6.4.1.1   Product Portfolio
6.4.1.2   Production Sites of Carpenter powder products
6.4.2   Business Strategies
6.4.2.1   Market Developments
6.4.3   Corporate Strategies
6.4.3.1   Mergers and Acquisitions
6.4.4   Research and Development (R&D) and Patent Analysis
6.4.5   Competitive Position
6.4.5.1   Strengths of Carpenter Technology Corporation in the Global Metal 3D Printing Market
6.4.5.2   Weaknesses of Carpenter Technology Corporation in the Global Metal 3D Printing Market
6.5   Sandvik AB
6.5.1   Company Overview
6.5.1.1   Product Portfolio
6.5.1.2   Production Sites
6.5.2   Business Strategies
6.5.2.1   Product Developments
6.5.2.2   Market Developments (2017-2020)
6.5.3   Corporate Strategies
6.5.3.1   Mergers and Acquisitions
6.5.3.2   Partnerships, Collaborations, and Joint Ventures
6.5.4   Research and Development (R&D) and Patent Analysis
6.5.5   Competitive Position
6.5.5.1   Strengths of Sandvik AB in the Global Metal 3D Printing Market
6.5.5.2   Weaknesses of Sandvik AB in the Global Metal 3D Printing Market
6.6   Linde
6.6.1   Company Overview
6.6.1.1   Product Portfolio
6.6.1.2   Global Presence
6.6.2   Corporate Strategies
6.6.2.1   Mergers and Acquisitions
6.6.2.2   Partnerships, Collaborations and Joint Ventures
6.6.3   Research and Development (R&D) Analysis
6.6.3.1   Research and Development (R&D) Analysis of Praxair, Inc.
6.6.3.2   Research and Development (R&D) Analysis of Linde AG
6.6.4   Competitive Position
6.6.4.1   Strengths of Linde in the Global Metal 3D Printing Market
6.6.4.2   Weaknesses of Linde in the Global Metal 3D Printing Market
6.7   Renishaw plc
6.7.1   Company Overview
6.7.1.1   Product Portfolio
6.7.1.2   Production Sites
6.7.2   Business Strategies
6.7.2.1   Product Developments
6.7.3   Corporate Strategies
6.7.3.1   Partnerships, Collaborations, and Joint Ventures
6.7.4   Research and Development (R&D) and Patent Analysis
6.7.5   Competitive Position
6.7.5.1   Strengths of Renishaw plc in the Global Metal 3D Printing Market
6.7.5.2   Weaknesses of Renishaw plc in the Global Metal 3D Printing Market
6.8   Materialise
6.8.1   Company Overview
6.8.1.1   Product Portfolio
6.8.1.2   Production Sites
6.8.2   Business Strategies
6.8.2.1   Product Developments
6.8.2.2   Market Developments
6.8.3   Corporate Strategies
6.8.3.1   Mergers and Acquisitions
6.8.3.2   Partnerships, Collaborations, and Joint Ventures
6.8.4   Research and Development (R&D) and Patent Analysis
6.8.5   Competitive Position
6.8.5.1   Strengths of Materialise in the Global Metal 3D Printing Market
6.8.5.2   Weaknesses of Materialise in the Global Metal 3D Printing Market
6.9   GENERAL ELECTRIC
6.9.1   Company Overview
6.9.1.1   Product Portfolio
6.9.1.2   Manufacturing Plants
6.9.2   Business Strategies
6.9.2.1   Product Developments
6.9.2.2   Market Developments (2017-2020)
6.9.3   Corporate Strategies
6.9.3.1   Mergers and Acquisitions
6.9.3.2   Partnerships, Collaborations, and Joint Ventures
6.9.4   Research and Development (R&D) and Patent Analysis
6.9.5   Competitive Position
6.9.5.1   Strengths of GENERAL ELECTRIC in the Global Metal 3D Printing Market
6.9.5.2   Weaknesses of GENERAL ELECTRIC in the Global Metal 3D Printing Market
6.10 DMG MORI
6.10.1   Company Overview
6.10.1.1   Product Portfolio
6.10.1.2   Production Sites
6.10.2   Business Strategies
6.10.2.1   Product Developments
6.10.2.2   Market Developments (2017-2020)
6.10.3   Corporate Strategies
6.10.3.1   Mergers and Acquisitions
6.10.3.2   Partnerships, Collaborations, and Joint Ventures
6.10.4   Research and Development (R&D) and Patent Analysis
6.10.5   Competitive Position
6.10.5.1   Strengths of DMG MORI in the Global Metal 3D Printing Market
6.10.5.2   Weaknesses of DMG MORI in the Global Metal 3D Printing Market
6.11   SLM Solutions
6.11.1   Company Overview
6.11.1.1   Product Portfolio
6.11.1.2   Global Presence
6.11.2   Business Strategies
6.11.2.1   Product Developments
6.11.2.2   Market Developments
6.11.3   Corporate Strategies
6.11.3.1   Partnerships, Collaborations, and Joint Ventures
6.11.4   Research and Development (R&D)
6.11.5   Competitive Position
6.11.5.1   Strengths of SLM Solutions in the Global Metal 3D Printing Market
6.11.5.2   Weaknesses of SLM Solutions in the Global Metal 3D Printing Market
6.12   Intech Additive Solutions Pvt. Ltd.
6.12.1   Company Overview
6.12.1.1   Product Portfolio
6.12.2   Business Strategies
6.12.2.1   Product Developments
6.12.3   Corporate Strategies
6.12.3.1   Mergers and Acquisitions
6.12.3.2   Partnerships, Collaborations, and Joint Ventures
6.12.4   Competitive Position
6.12.4.1   Strengths of Intech Additive Solutions Pvt. Ltd. in the Global Metal 3D Printing Market
6.12.4.2   Weaknesses of Intech Additive Solutions Pvt. Ltd. In the Global Metal 3D Printing Market
6.13   3D Systems, Inc.
6.13.1   Company Overview
6.13.1.1   Product Portfolio
6.13.1.2   Global Presence
6.13.2   Business Strategies
6.13.2.1   Product Developments
6.13.2.2   Market Developments (2017-2020)
6.13.3   Corporate Strategies
6.13.3.1   Partnerships, Collaborations, and Joint Ventures
6.13.4   Research & Development (R&D) and Patent Analysis
6.13.5   Competitive Position
6.13.5.1   Strengths of 3D Systems, Inc. in the Global Metal 3D Printing Market
6.13.5.2   Weaknesses of 3D Systems, Inc. in the Global Metal 3D Printing Market
6.14   TRUMPF
6.14.1   Company Overview
6.14.1.1   Product Portfolio
6.14.1.2   Production sites
6.14.2   Business Strategies
6.14.2.1   Product Developments
6.14.3   Market Developments (2017-2020)
6.14.3.1   Corporate Strategies
6.14.3.1.1   Partnerships, Collaborations, and Joint Ventures
6.14.3.2   Research and Development (R&D) and Patent Analysis
6.14.4   Competitive Position
6.14.4.1   Strengths of TRUMPF in the Global Metal 3D Printing Market
6.14.4.2   Weaknesses of TRUMPF in the Global Metal 3D Printing Market
6.15   HP Development Company, L.P.
6.15.1   Company Overview
6.15.1.1   Product Portfolio
6.15.1.2   Production sites
6.15.2   Business Strategies
6.15.2.1   Product Developments
6.15.2.2   Market Developments
6.15.3   Corporate Strategies
6.15.3.1   Partnerships, Collaborations, and Joint Ventures
6.15.4   Research and Development (R&D) and Patent Analysis
6.15.5   Competitive Position
6.15.5.1   Strengths of HP Development Company, L.P. in the Global Metal 3D Printing Market
6.15.5.2   Weaknesses of HP Development Company, L.P. in the Global Metal 3D Printing Market
6.16   STRATASYS LTD.
6.16.1   Company Overview
6.16.1.1   Product Portfolio
6.16.1.2   Global Presence
6.16.2   Business Strategies
6.16.2.1   Product Developments
6.16.3   Corporate Strategies
6.16.3.1   Partnerships, Collaborations, and Joint Ventures
6.16.4   Research and Development (R&D) and Patent Analysis
6.16.5   Competitive Position
6.16.5.1   Strengths of STRATASYS LTD. in the Global Metal 3D Printing Market
6.16.5.2   Weaknesses of STRATASYS LTD. in the Global Metal 3D Printing Market
6.17   Other Key Players

7.1   Data Sources
7.1.1   Primary Data Sources
7.1.2   Secondary Data Sources
7.1.3   Data Triangulation
7.2   Market Estimation & Forecast
7.2.1   Factors for Data Prediction and Modeling

Table 1.1:   Increasing Demand from Medical Sectors Because of COVID-19
Table 1.2:   Key Factors in Determining “Threat from New Entrants” in the Global Metal 3D Printing Market
Table 1.3:   Key Factors in Determining Bargaining Power of Buyers in the Global Metal 3D Printing Market
Table 1.4:   Key Factors in Determining Bargaining Power of Suppliers in Global Metal 3D Printing Market
Table 1.5:   Analyzing the Threat of Substitutes in the Global Metal 3D Printing Market
Table 1.6:   Key Factors in Determining Rivalry Among Existing Firms in the Global Metal 3D Printing Market
Table 1.7:   Consortiums and Associations for Metal 3D Printing
Table 1.8:   Government Initiatives for Metal 3D Printing
Table 1.9:   Programs by Research Institutions and Universities
Table 1.10:   Description of Metals / Alloys with Their Applications and Examples
Table 1.11:   Product Developments (2017-2020)
Table 1.12:   Market Developments (2017-2020)
Table 1.13:   Mergers and Acquisitions (2017-2020)
Table 1.14:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 2.1:   Global Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 2.2:   Companies Producing Different Products for Aerospace Using Different Metals and Metal 3D Printing Processes
Table 2.3:   Application Areas of Metal 3D Printing in Medical and Healthcare Sector
Table 2.4:   3D Printed Metal Products by Metal/Alloy, by Company, and by Technology
Table 2.5:   Application of 3D Printed Metal Product/Project, by Metal/Alloy, by Company, by Technology
Table 3.1:   Global Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 3.2:   Global Metal 3D Printing Market (by Type of Raw Material Used in 3D Printing), $Million, 2019-2025
Table 4.1:   Global Metal 3D Printing Market (by Technology), $Million, 2019-2025
Table 5.1:   Global Metal 3D Printing Market (by Region), $Million, 2019-2025
Table 5.2:   Key Manufacturers/Suppliers of Metal Powder and Metal 3D printers in North America
Table 5.3:   North America Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.4:   North America Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.5:   North America Metal 3D Printing Market (by Technology), $Million, 2019-2025
Table 5.6:   Key Manufacturers/Suppliers of Metal Powder and Metal 3D Printers in U.S.
Table 5.7:   U.S. Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.8:   U.S. Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.9:   Key Manufacturers/Suppliers of Metal Powder and Metal 3D Printers in Canada
Table 5.10:   Canada Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.11:   Canada Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.12:   Mexico Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.13:   Mexico Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.14:   Asia-Pacific Japan (APJ) Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.15:   Asia-Pacific Japan (APJ) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.16:   Asia-Pacific Japan (APJ) Metal 3D Printing Market (by Technology), $Million, 2019-2025
Table 5.17:   Japan Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.18:   Japan Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.19:   India Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.20:   India Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.21:   South Korea Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.22:   South Korea Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.23:   Australia & New Zealand Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.24:   Australia & New Zealand Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.25:   Singapore Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.26:   Singapore Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.27:   Key Manufacturers/Suppliers of Metal Powder/Filaments and Metal 3D Printers in Taiwan
Table 5.28:   Taiwan Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.29:   Taiwan Metal 3D Printing Market ((by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.30:   Key Manufacturers/Suppliers of Metal Powder/Filaments and Metal 3D Printers in Rest-of-APJ
Table 5.31:   Rest-of-APJ Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.32:   Rest-of-APJ Metal 3D Printing Market ((by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.33:   Key Manufacturers/Suppliers of Metal powder/Filaments and Metal 3D Printers in China
Table 5.34:   China Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.35:   China Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.36:   China Metal 3D Printing Market (by Technology), $Million, 2019-2025
Table 5.37:   Key Manufacturers/Suppliers of Metal Powder/ Filaments and Metal 3D Printers in Europe
Table 5.38:   Europe Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.39:   Europe Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.40:   Europe Metal 3D Printing Market (by Technology), $Million, 2019-2025
Table 5.41:   Key Manufacturers/Suppliers of Metal Powder and Metal 3D Printers in Germany
Table 5.42:   Germany Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.43:   Germany Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.44:   Key Manufacturers/Suppliers of Metal Powder and Metal 3D Printers in France
Table 5.45:   France Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.46:   France Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.47:   Key Manufacturers/Suppliers of Metal Powder and Metal 3D Printers in Italy
Table 5.48:   Italy Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.49:   Italy Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.50:   Key Manufacturers/Suppliers of Metal Powder and Metal 3D Printers in Spain
Table 5.51:   Spain Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.52:   Spain Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.53:   Netherlands Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.54:   Netherlands Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.55:   Rest-of-Europe (RoE) Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.56:   Rest-of-Europe (RoE) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.57:   U.K. Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.58:   U.K. Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.59:   U.K. Metal 3D Printing Market (by Technology), $Million, 2019-2025
Table 5.60:   Rest-of-the-World (RoW) Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.61:   Rest-of-the-World (RoW) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.62:   Rest-of-the-World (RoW) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.63:   South America Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.64:   South America Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 5.65:   Middle East & Africa (MEA) Metal 3D Printing Market (by Application), $Million, 2019-2025
Table 5.66:   Middle East & Africa (MEA) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
Table 6.1:   Product Developments (2017-2020)
Table 6.2:   Market Developments (2017-2020)
Table 6.3:   Mergers and Acquisitions (2017-2020)
Table 6.4:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.5:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.6:   Market Developments (2017-2020)
Table 6.7:   Mergers and Acquisitions (2017-2020)
Table 6.8:   Partnerships, Collaborations and Joint Ventures
Table 6.9:   Product Developments (2017-2020)
Table 6.10:   Market Developments (2017-2020)
Table 6.11:   Mergers and Acquisitions (2017-2020)
Table 6.12:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.13:   Mergers and Acquisitions (2017-2020)
Table 6.14:   Partnerships, Collaborations and Joint Ventures (2017-2020)
Table 6.15:   Product Developments (2017-2020)
Table 6.16:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.17:   Product Developments (2017-2020)
Table 6.18:   Market Developments (2017-2020)
Table 6.19:   Mergers and Acquisitions (2017-2020)
Table 6.20:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.21:   Product Developments (2017-2020)
Table 6.22:   Product Developments (2017-2020)
Table 6.23:   Product Developments (2017-2020)
Table 6.24:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.25:   Product Developments (2017-2020)
Table 6.26:   Mergers and Acquisitions (2017-2020)
Table 6.27:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.28:   Product Developments (2017-2020)
Table 6.29:   Market Developments (2017-2020)
Table 6.30:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.31:   Product Developments (2017-2020)
Table 6.32:   Mergers and Acquisitions (2017-2020)
Table 6.33:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.34:   Product Developments (2017-2020)
Table 6.35:   Market Developments (2017-2020)
Table 6.36:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.37:   Product Developments (2017-2020)
Table 6.38:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.39:   Product Developments (2017-2020)
Table 6.40:   Market Developments (2017-2020)
Table 6.41:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.42:   Product Developments (2017-2020)
Table 6.43:   Partnerships, Collaborations, and Joint Ventures (2017-2020)
Table 6.44:   Other Key Players in the Global Metal 3D Printing Market

Figure 1:   Global Metal 3D Printing Market Overview, 2019-2025
Figure 2:   Global Metal 3D Printing Market (by Types of 3D Printed Metals and Alloys), 2018, 2019, and 2025
Figure 3:   Global Metal 3D Printing Market (by Types of Raw Material Form), 2018, 2019, and 2025
Figure 4:   Global Metal 3D Printing Market (by Technology), 2019, 2020, and 2025
Figure 5:   Global Metal 3D Printing Market Analysis (by Application), 2019-2025
Figure 6:   Global Metal 3D Printing Market (by Region), 2019
Figure 7:   Global Metal 3D Printing Market
Figure 1.1:   Global Metal 3D Printing Market Supply Chain
Figure 1.2:   Porter’s Five Forces Analysis
Figure 1.3:   Supply and Demand Analysis
Figure 1.4:   Capital Investment/Cost Per Part Drops Significantly as Volume for the Part Increases
Figure 1.5:   Metal 3D Printing:Stable Cost Per Part and Independent of Print Volume
Figure 1.6:   R&D Expenditures of Top Players in the Metal 3D Printing
Figure 1.7:   Leveraging Additive Manufacturing With Workflow Automation Software
Figure 1.8:   Share of Key Business Strategies and Developments, 2017-2020
Figure 2.1:   Global Metal 3D Printing Market (by Application)
Figure 2.2:   Aerospace and Defense in the Global Metal 3D Printing Market (by Application), $Million, 2019-2025
Figure 2.3:   Medical and Healthcare in Global Metal 3D Printing Market (by Application), $Million, 2019-2025
Figure 2.4:   Automotive in the Global Metal 3D Printing Market (by Application), $Million, 2019-2025
Figure 2.5:   Other (Consumer, Construction, Tool and Die, General Engineering) in the Global Metal 3D Printing Market (by Application), Kilotons, $Million, 2019-2025
Figure 3.1:   Types of Products in the Global Metal 3D Printing Market
Figure 3.2:   List of Titanium Alloys Capable of Getting 3D Printed
Figure 3.3:   Titanium in Global Metal 3D Printing Market (by Type), $Million, 2019-2025
Figure 3.4:   List of Aluminum Alloys Capable of Getting 3D Printed
Figure 3.5:   Aluminum in Global Metal 3D Printing Market (by Type), $Million, 2019-2025
Figure 3.6:   List of Steels Capable of Getting 3D Printed
Figure 3.7:   Steels in the Global Metal 3D Printing Market (by Type), $Million, 2019-2025
Figure 3.8:   List of Nickel Alloys Capable of Getting 3D Printed
Figure 3.9:   Nickel Alloys in the Global Metal 3D Printing (by Type), $Million, 2019-2025
Figure 3.10:   List of Other Alloys Capable of Getting 3D Printed
Figure 3.11:   Other Alloys in Global Metal 3D Printing Market (by Type), $Million, 2019-2025
Figure 3.12:   Gas Atomization Process for Different Metal 3D Printing Techniques Adopted for 3D Printing Different Alloys
Figure 3.13:   Requirements to be Met by the Metal Powders to be Used in the Metal 3D Printing Process
Figure 3.14:   Powder-Based Raw Material in Global Metal 3D Printing Market (by Type), $Million, 2019-2025
Figure 3.15:   Resin-Based Metal 3D Printing for Different Metal 3D Printing Techniques
Figure 3.16:   Resin-Based Raw Material in Global Metal 3D Printing Market (by Type), $Million, 2019-2025
Figure 3.17:   Lamina-Based Raw Material in the Global Metal 3D Printing Market (by Type), $Million, 2019-2025
Figure 3.18:   Filament / Wire-Based Raw Material in Global Metal 3D Printing (by Type), $Million, 2019-2025
Figure 4.1:   Global Metal 3D Printing (by Technology)
Figure 4.2:   Powder-Bed Fusion in Global Metal 3D Printing Market (by Technology), $Million, 2019-2025
Figure 4.3:   Material/Binder Jetting in Global Metal 3D Printing Market (by Technology), $Million, 2019-2025
Figure 4.4:   Direct Energy Deposition (DED) in Global Metal 3D Printing Market (by Technology), $Million, 2019-2025
Figure 4.5:   Extrusion in Global Metal 3D Printing Market (by Technology), $Million, 2019-2025
Figure 4.6:   Others (Resin-Based and Sheet Lamination-Based Metal 3D Printing) in the Global Metal 3D Printing Market (by Technology), $Million, 2019-2025
Figure 4.7:   Global Metal 3D Printing Market Opportunity Matrix (by Region), $Million,2019-2025
Figure 4.8:   Global Metal 3D Printing Market Opportunity Matrix (by Product Type), $Million, 2019-2025
Figure 4.9:   Year-Wise Patents Filed for Metal 3D Printing, 2015-2020
Figure 4.10:   Patent Analysis (by Status), January 2015-February 2019
Figure 4.11:   Patent Analysis (by Company), January 2015 to February 2020
Figure 4.12:   Patent Analysis, (by Type of Metals/Alloys Used in Metal 3D Printing), January 2015 to February 2020
Figure 5.1:   Competitive Benchmarking
Figure 5.2:   Competitive Benchmarking
Figure 5.3:   Competitive Benchmarking
Figure 5.4:   Competitive Benchmarking
Figure 5.5:   Competitive Benchmarking
Figure 5.6:   Competitive Benchmarking
Figure 6.1:   Competitive Benchmarking
Figure 6.2:   Oerlikon: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.3:   Oerlikon: Production Sites
Figure 6.4:   R&D Expenditure of Oerlikon
Figure 6.5:   Figure Showing Number of Patents Filed Each Year by Oerlikon
Figure 6.6:   Aubert & Duval: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.7:   Aubert & Duval: Industrial Sites
Figure 6.8:   Carpenter Technology Corporation: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.9:   Carpenter Technology Corporation: Production Sites
Figure 6.10:   R&D Expenditure of Carpenter Technology Corporation
Figure 6.11:   Sandvik AB: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.12:   R&D Expenditure of Sandvik AB
Figure 6.13:   Number of Patents filed by Sandvik AB during 2015-2019
Figure 6.14:   Linde: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.15:   Importance of Process Gases in the Metal 3D Printing
Figure 6.16:   Linde: Global Presence of Subsidiaries of Linde
Figure 6.17:   R&D Investments by Praxair, Inc. During FY 2015-FY 2017
Figure 6.18:   R&D Investments by Linde AG during FY 2015-FY 2017
Figure 6.19:   Renishaw plc: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.20:   Renishaw plc: Production Sites
Figure 6.21:   Expenditure on R&D for Development of New Products
Figure 6.22:   Number of Patents Filed by Renishaw plc Each Year During FY 2017-FY 2019
Figure 6.23:   Materialise: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.24:   Materialise: Production Sites
Figure 6.25:   R&D Expenditure for Materialise During FY2016-FY2018
Figure 6.26:   GENERAL ELECTRIC: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.27:   GENERAL ELECTRIC: Manufacturing Plants
Figure 6.28:   R&D Expenditure by GENERAL ELECTRIC during FY 2017-FY 2019
Figure 6.29:   DMG MORI: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.30:   DMG MORI: Factory
Figure 6.31:   R&D Costs for DMG MORI during FY2016-FY 2018
Figure 6.32:   Number of Patents filed by DMG MORI during FY2015-FY 2019
Figure 6.33:   SLM Solutions: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.34:   SLM Solutions: Global Presence
Figure 6.35:   Company’s Employee Strength in the R&D wing
Figure 6.36:   Intech Additive Solutions Pvt. Ltd.: Product Portfolio in Metal 3D Printing Market
Figure 6.37:   3D Systems, Inc.: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.38:   3D Systems, Inc.: Global Presence
Figure 6.39:   R&D Expenditure of 3D Systems, Inc.
Figure 6.40:   Number of Patents Held By 3D Systems, Inc. during FY 2015-FY 2019
Figure 6.41:   TRUMPF: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.42:   R&D expenditure of TRUMPF
Figure 6.43:   HP Development Company, L.P.: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.44:   R&D expenditure of HP Development Company, L.P.
Figure 6.45:   STRATASYS LTD.: Product Portfolio in the Global Metal 3D Printing Market
Figure 6.46:   STRATASYS LTD.: Global Presence
Figure 6.47:   R&D Expenditure of STRATASYS LTD.
Figure 6.48:   Number of Patents Filed by STRATASYS LTD.
Figure 7.1:   Data Triangulation
Figure 7.2:   Top-Down and Bottom-Up Approach
Figure 7.3:   Assumptions and Limitations

Metal 3D Printing Market Report Coverage

Metal 3D Printing
Base Year	2019	Market Size in 2019	$378.0 Million
Forecast Period	2020-2025	Value Estimation by 2025	$738.8 Million
CAGR During Forecast Period	24.41%	Number of Tables	107
Number of Pages	348	Number of Figures	132
Research Hours	320
Market Segmentation	• Product – Metals/Alloys type, including titanium alloys, nickel alloys, steel, aluminium and others (Copper and its alloys, tungsten, cobalt chrome-alloys, gold, silver) • Technology - Powder Bed Fusion, Material/Binder Jetting, Direct Energy Deposition, Extrusion, and others (Resin-based and Sheet Lamination-Based Metal 3D Printing) • Raw material form – Powder-based, Resin-based, Lamina-based and filament/wire • Application –Aerospace and Defense, Automotive, Healthcare, and Other (Consumer, Construction, Tool and Die, General Engineering)
Regional Segmentation	• North America - U.S., Canada, and Mexico • Asia-Pacific Japan (APJ) – Japan, India, South Korea, Taiwan, Australia & New Zealand, Singapore, Rest-of-APJ • China • Europe – Germany, France, Italy, Spain, Netherlands, and Rest-of-Europe • U.K. • Rest-of-the-World – South America and Middle East and Africa (MEA)
Growth Drivers	• Cost-effectiveness, greater design flexibility and lower wastage • Reduced prices of metal 3D printers coupled with advanced raw materials • Increasing investments in research and development (R&D)
Market Challenges	• Technological challenges • Software challenges • Quality assurance challenges • Workforce challenges • Financial challenges • Workflow and integration challenges
Market Opportunities	• Growing adoption of metal used in aerospace and defense sector • Producing high quality metal powder with enhanced quality • COVID-19
Key Companies Profiled	Aubert & Duval, Carpenter Technology Corporation, DMG MORI, GENERAL ELECTRIC, HP Development Company, L.P., Intech Additive Solutions Pvt. Ltd., Linde, Materialise, Oerlikon, Renishaw plc, Sandvik AB, SLM Solutions, STRATASYS LTD., TRUMPF, and 3D Systems, Inc., among others.

Key Questions Answered in this Report:

•   How much revenue was generated by the global metal 3D printing market in 2019, and how much revenue is expected to be generated by the market by 2025?
•   What are the major market drivers, restraints, opportunities, and challenges in the global metal 3D printing market?
•   How is the global metal 3D printing market expected to grow during the forecast period, on the basis of segments such as:
o   metals/alloys type, including titanium alloys, nickel alloys, steel, aluminum and others (Copper and its alloys, tungsten, cobalt chrome-alloys, gold, silver).
o   metal 3D printing technology type, including Powder Bed Fusion, Material/Binder Jetting, Direct Energy Deposition, extrusion, and others (Resin-based and sheet lamination-based metal 3D printing).
o   raw material form, including powder-based, resin-based, lamina-based and filament / wire-based.
o   applications, including aerospace & defense, automotive, healthcare and other (Consumer, Construction, Tool and die, general engineering).
o   region, including North America, Asia-Pacific (APJ), China, Europe, U.K., Rest-of-the-World (RoW).
o   impact of COVID-19 on business dynamics of different regions
•   What are the key development strategies which are implemented by the major players in order to sustain in the competitive market?
•   What are the key regulatory implications in developed and developing regions towards the regulations and standards for metal 3D printing?
•   Who are the leading players with significant offerings to the global metal 3D printing market? What is the current market dominance for each of these leading players?

Market Overview

The global metal 3D printing market is undergoing growing adoption in the present market, especially in aerospace and defense and healthcare sectors. The aerospace and defense sector has been utilizing this technology toward the development of its complex high-performance gas turbine engines and its structural components. The healthcare segment has been utilizing this technology for the development of human implants. However, the technology has come into greater force toward the development of essential health-related equipment, such as ventilator parts at the time of COVID-19 pandemic.

Among the various metals/alloys which can be 3D printed, aluminum alloys hold the largest market share primarily due to the high strength-to-weight ratio, high corrosion resistance, and good fatigue strength with better build rates. Also, aluminum alloys are economical in nature as compared to nickel or titanium alloys.

However, in terms of growth rates, the market for the titanium alloys are expected to be growing at the fastest rate during the forecast period 2020-2025 which can be attributed mostly to their high increased adoption in aerospace & defense and healthcare sectors.

Among the various types of technologies employed for metal 3D printing, powder-bed fusion is expected to dominate the market during the forecast period 2020-2025 mainly due to the economical nature of powders and their ease of handling. Also, the metal products developed via powder-bed 3d printing process are expected to possess high dimensional accuracy.

Among the various forms of raw materials for the metals, employed for metal 3D printing, powder-based raw materials are expected to dominate the market during the forecast period 2020-2025.

Apart from growing demands for the metal 3D printing, there are some factors which are likely to hinder the market growth. The major factors hindering the market growth are high costs of metal powders and industry grade 3D printers, lower strength, residual stress and cracking, heat build-up and oxidation, surface finish, porosity, and accuracy.

The global metal 3D printing market accounted for $378.0 million in 2019 and is expected to be $738.8 million by 2025. The market is anticipated to grow at a CAGR of 24.41% during the forecast period 2020 to 2025. The market growth is attributed to the increased adoption of the technology toward the aerospace and defense and healthcare sectors. The market is expected to witness thrust due to its gaining popularity at the time of global crisis COVID-19, where the technology exhibited its exceptional capability of in-house development of essential health-related items such as ventilator parts and other door-handles made of copper (capable of killing coronavirus to 99.6% in just five hours).

Competitive Landscape

The metal 3D printing technology possesses capability of developing complex metal objects with high dimensional accuracy in quick time, without depending much on supply chain. As a result, there have been increasing adoption for this technology in sectors which emphasize more on the development of products demanding high quality where the cost does not restrict the market. Among these, aerospace and defense and healthcare sectors are ones which have been witnessing high adoptions, paving market opportunities both for established market players and new market entrants. Moving forward, there have been various kinds of business activities exercised by the market players so as to establish themselves and create good customer base across the globe.

Some of the business strategies executed in this regard are product launches, business expansions, mergers and acquisitions and signing of partnerships/collaborations/joint ventures between established players, as well as new entrants in the metal 3D printing market. Several companies, including Admatec BV, DMG MORI, GENERAL ELECTRIC, HP Development Company, L.P., Intech Additive Solutions Pvt. Ltd., Markforged, Inc., Materialise, Oerlikon, Optomec, Inc., Renishaw plc, Sandvik AB, SLM Solutions, STRATASYS LTD., TRUMPF, and 3D Systems, Inc., were involved in new product launches. Carpenter Technology Corporation, DMG MORI, GENERAL ELECTRIC, HP Development Company, L.P., Materialise, Oerlikon, Sandvik AB, SLM Solutions, 3D Systems, Inc., Rapid Advanced Manufacturing Limited (RAM3D), and Siemens, were involved in the business expansions. AddUp, Carpenter Technology Corporation, DMG MORI, GENERAL ELECTRIC, Intech Additive Solutions Pvt. Ltd., Linde, Materialise, Oerlikon, Sandvik AB, and Xerox Corporation, among others, were involved in the strategy of mergers and acquisitions and Aubert & Duval, Carpenter Technology Corporation, DMG MORI, GENERAL ELECTRIC, HP Development Company, L.P., Intech Additive Solutions Pvt. Ltd., Linde, Materialise, Oerlikon, Renishaw plc, Sandvik AB, SLM Solutions, STRATASYS LTD., TRUMPF, and 3D Systems, Inc., among others, were involved in the partnerships, collaborations and joint-ventures.